FIREFIGHTING BOOTS MODEL 9687L EN 15090 & CE :

• MODEL 9687L EN 15090 & CE
• HEIGHT: 15 in. (Approx.) Electrical Shock Resistant to 18 KV

Specification

Colour	Black/Yellow
Size range	Euro: 36 – 50 UK : 3½ – 15 US : 4½ – 16
Type of construction	Vulcanized Rubber Upper and Sole
Last/ Sole Pattern	VSV / NJV
Recommendation	Structural fire fighting General fire rescue Bush fire fighting
Compliance	European Standard CE and UKCA Approved – EN 15090: 2012 (F2 HI3 P CI SRA) EN ISO 20345: 2011 (SB P E FO CI HI HRO SRA) EN 50321-1:2018 Class 0 (for installation with nominal voltage up to 1000V A.C and 1500V D.C.) Australian New Zealand Standard Approved – AS/NZS 4821: 2014 (P HI2 CI SRC) F2/F2I = Type 2 footwear for firefighters suitable for fire rescue, fire suppression, property conservation & etc. with electrical insulating SB = Standard Basic Protection as per EN ISO 20345 HI3 = Heat Insulation Level 3 (under EN 15090:2012) HI2 = Heat Insulation Level 2 (under AS/ NZS 4821:2014) CI = Cold Insulation SRA = Slip Resistance on ceramic tile with Sodium Lauryl Sulphate SRC = SRA + Slip Resistance on steel surface with glycerin FO = Fuel Oil Resistant Outsole E = Heel Energy Absorption P = Nail Penetration Resistance HRO = Resistance to hot contact CSA Z195-14 / ASTM F2413-18 Grade 1 Toe protection Compression resistance, 11kN Nail penetration resistance 18 kV Electric Shock Resistance (ESR) protection Council Directive 2014/90/EU On Marine Equipment (MED) Complies Module B & D requirements *YY = year marking is affixed on the boot
Lining Material	Extra comfort with woven cotton canvas
Upper construction	Flame retardant upper with heat insulation Waterproof Reinforced rubber High visibility with black and yellow contrast
Sole / Heel	Flame retardant rubber outsole Fuel oil resistant sole suitable for inimical environment Slip resistant vulcanized rubber outsole Excellent abrasion resistant for extra durability Withstand 18kV of life current at dry condition Heel energy absorption design to minimize heel impact Catered to enter high temperature Cold insulation sole construction
Steel Toe Cap	Epoxy coated toe caps for anti-corrosion Meets EN ISO 20345 impact and compression tests Metal toecap provides reliable protection in cold & hot environments
Steel Midsole	Non-corrosive stainless steel Withstands pin & sharp objects
Chemical Resistance	Sole & Upper – Good resistant towards acids and alkalis
Finishing	Lacquer coating for weather protection
Packing	Recyclable Polybag & 6 pairs in a carton

*Specifications of the product are subject to changes without prior notice for further enhancements.

Fire Boots Size