FIREFIGHTING HOSE MANUFACTURed TO BS, NFPA AND FM APPROVED

• Three-layer Firefighting Hose Reinforced with Woven 100% Synthetic Fibers.
• Extruded “Through the Weave” Synthetic Nitrile Rubber Inner and Outer Layer.
• Smooth Bore Internal Tube, Ribbed Outer Cover For High Performance and Long Life.
• Storage Temperature to 50 ํC and Working Temperature to 600 ํC.
• Excellent Chemical Resistance. Easy Maintenance, Use, Roll-up and Store.
• Each Length Marked with FM Inspection Code, Test and Compliance Certificate.

*Weight: 30m length

FIRE HOSE STANDARDS

• BURST PRESSURE - Test Performed to Burst Limit, Test Without Couplings.
• ACCEPTANCE (TEST) PRESSURE - Test Performed to 66% of Burst Pressure.
• WORKING SERVICE TEST PRESSURE - Test Performed with Couplings According to NFPA or BS Standard. NFPA 1961 Working Service Test Pressure for New Hose:
  1.5” Diameter Hose- 300 PSI for 10 minutes
  2.5” Diameter Hose- 250 PSI for 10 Minutes
  4” Diameter Hose- 200 PSI for 10 Minutes

RUBBER HOSE REPAIR SYSTEM - REPAIR ARMTEX AND BLINDEX HOSE

• Repair Holes Caused by Punctures
• Repair Tears Caused by Abrasion
• 2-Layer Vulcanized Repairs, Red and Yellow
• For Hoses 1.5" to 4". For Holes and Tears 1/8" to 2"
• After Repair, Hose Repair is Tested to 200 PSI (13.8 Bar)

EUROPE AND UNITED KINGDOM (ENGLAND) STANDARDS

• BS6391 - UK STANDARD
• TYPE 1 - Woven Hose
• TYPE 2 - Woven and Coated Hose
• TYPE 3 - Rubber Extruded Hose
• BS336 - British Standard for 2.5" (64mm) Instantaneous Couplings
• TEST STANDARD: 1.5" & 2.5" (22.5 BAR FOR 1 Minute)
• EN STANDARD: EN694 and EN14510 Woven Hose
• SPANISH STANDARD: UNE
• 3RD PARTY INTERNATIONAL TESTING LABS (According to Standards)
• FM, AENOR, Certied Testing Labs