ABRASION/CORROSION & WEAR REPAIR EPOXIES

*Alumina Filled Epoxy *Strong Adhesion & Wear Resistance *Protect Against Chemical Corrosion *Protect Dry Handling & Storage Machinery *Prepare Surface *Mix Properly *Apply by Troweling or Brushing
Ceramic epoxies are used to rebuild and repair damage from abrasion/corrosion and wear on pump casings, impeller blades, valves, process machinery, circulating water equipment, chutes, hoppers and equipment used in corrosive and abrasive environments. Coating this equipment extends the working life and improves performance.

CERAMIC REPAIR PUTTY: P/N 11700 3 lbs. (1.35 Kg.) .66 m @ .025 in (6.3 mm.) Thickness

• Repairs: Rebuilds Pump Linings and Impellers, Fan Housing, Filter Plate
• Drying Color: Red Putty
• Working Time: 20 minutes.
• Full Cure: 16 hours.
• Recoat Time: 2-3 hours
• Volume Mix Ratio: 4.3:1
• Working Temperature: Dry: 176 °C , Wet: 66 °C
• Adhesive Tensile Shear Strength: 2,000 PSI. (13.8 MPa)
• Compressive Strength: 12,700 PSI. (87.56 MPa)
• Hardness: 90 Shore D
• Drying Color: Red Putty